Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7.2 Live view

Explanation of symbols
SD card display
No SD card
SD card detected and
almost empty
SD card full
Battery status display
Battery fully charged
Low battery
Internet connection status
Connection is being
established
Connection established
successfully
Disconnected
Remote access active
Intranet
Tip: Always switch off the device before removing the SD card.
Note that the device does have a cyclic recording function.
However the default is set to stop once the SD card is full, no
more recordings can be saved. Instructions to set the cyclic
recording function are found below. If you desire more capacity
please purchase a larger memory SD card.
The batteries will provide power for approx. 1.5 hours.
Charge the monitor battery as soon as the symbol appears and
flashes.
A connection to the network is being established.
A connection to the network has been established.
The network connection has been disconnected.
This symbol appears if the live image is accessed via the app.
This symbol appears if your monitor is connected to the network
but no internet access is required.
17
English

Publicité

Table des Matières
loading

Table des Matières