Abus TVAC16000C Notice D'utilisation page 33


Entering system information

Connection status
Enter a name for your system at "System Name" which should
1.
then be displayed on your mobile phone.
2. Now enter the 15 digit DID number. You can find the DID at the
rear of the monitor and in the Network Information (see page 27).
This you can find in your monitor's network information on the
label stuck on the product or click on "Search" and all the devices
in the near vicinity are displayed.
3. Then enter your password.
The password is the security code which you can also find in your
monitor's network information.
If you have not changed your password on the monitor, this will be
the default password: 123456.
Save the settings with "Save" and "Yes".
4.
Once you change your password in the monitor, you also have to
change it here; otherwise you will not be able to access the
cameras.
If you have added you system successfully, the name of your system
and the current connection status appear.
Click on the screen to go to the live view.
System name
e.g. System 1
Connection status
Connected = you are connected with your system
Disconnected = there is no connection to the system
Adding the system
Here you can add an additional system
System configuration
Go to the system configuration here.
Press
Updating the connection
The connection is updated.
Firmware information / PIN code
Here you can see the current firmware version of
the system and save a PIN code. You can find out
how to enter a PIN code at .
33
to go to the live view again.
English