Setting The Time; Cleaning The Under-Bench Air Conditioner - Dometic FreshWell2000 Notice D'utilisation

FreshWell2000
8.11

Setting the time

The remote control needs the current time in order to program the timer. The
time is indicated on the display of the remote control.
Perform the following steps to set the time:
I
NOTE
The remote control returns to its initial mode if no key is pressed
on the remote control for ten seconds while setting the time.
➤ Press and hold the CLOCK button to go to the mode used to set the time.
✓ The time flashes on the display of the remote control.
➤ Use the + or – button to set the current time.
➤ Press the SET – °F/°C button to confirm the time.
9 Cleaning the under-bench air
conditioner
A
NOTICE! Beware of damage
z Do not clean the under-bench air conditioner with a high-
pressure cleaner. Exposure to water can damage the air
conditioner.
z Do not use sharp or hard objects or cleaning agents for clean-
ing as these may damage the under-bench air conditioner.
z To clean the under-bench air conditioner, use water with a
gentle cleaning agent. Never use petrol, diesel or solvents.
➤ Clean the housing of the under-bench air conditioner and the air outlet
unit occasionally with a damp cloth.
➤ Regularly remove leaves and other dirt from the ventilation grilles
(fig. 5 1, page 5) of the under-bench air conditioner. Make sure you do
not damage the grilles in the process.
➤ Clean the remote control with a slightly damp cloth from time to time. We
recommend using a cleaning cloth for glasses to clean the display.
EN

Cleaning the under-bench air conditioner

25