Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
G. Reinstall wiring cover
Secure the wiring cover to the VFD with the four screws.
H. Install remote keypad mounting plate
Select a mounting location that is visible from the fan. Remove the two screws and the rubber gasket from the
back of the remote keypad. Discard the screws. Attach the rubber gasket and the remote keypad mounting
plate to a junction box in the wall with the Mounting Plate Hardware. The mounting plate fits a standard junction
box (not supplied).
Mounting Plate Hardware:
a. (2) 6-32 x 1-1/4" Flat Head Screw
I. Mount remote keypad
Rest the remote keypad in the keypad cover, and then secure the cover to the mounting plate with the Remote
Keypad Hardware. Apply power and test the fan.
Remote Keypad Hardware:
a. (4) 6-32 x 0.38" Flat Head Screw
20
Junction Box
Mounting
Plate
WWW.BIGASSFANS.COM
© 2018 DELTA T LLC
Mounting Plate
Remote
Keypad
ALL RIGHTS RESERVED.
VFD
Wiring
Cover
a
Rubber
Gasket
a
Keypad
Cover
Publicité
Table des Matières
