Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. Secure upper safety cable
The upper safety cable is a crucial part of the fan and must be installed correctly. If you have
any questions, contact Customer Service for assistance.
Wrap the upper safety cable (pre-attached to extension tube) around the angle irons or I-beam and secure the
looped ends with the shackle. The cable must be drawn tightly around the mounting structure, leaving as little
slack as possible with the shackle on the topside of the mounting structure. Securely tighten the shackle.
Safety Cable Hardware:
a. Shackle
Industrial Mounting
Hardware Board
6. Install lower yoke brackets
Attach the lower yoke brackets to the bottom of the extension tube with the Lower Yoke Hardware. Do not fully
tighten the hardware.
Lower Yoke Hardware:
a. (2) 1/2-13 x 5'' GR 8 Bolt
b. (4) 1/2'' Flat Washer
c. (2) 1/2-13 Nylock Nut
Industrial Mounting
Hardware Board
Angle Irons
DO NOT FULLY
TIGHTEN
Lower Yoke Brackets
WWW.BIGASSFANS.COM
© 2018 DELTA T LLC
a
a
b
ALL RIGHTS RESERVED.
I-Beam
a
b
c
13
Publicité
Table des Matières
