Nilfisk ECOFLEX BA 651 Manuel D'utilisation page 78

ENGLISH
Cylindrical brush installation/removal (only for BA 751C)
1. Turn the ignition key (80) to "I".
2. Lift the cylindrical brush deck by pressing the switch (71).
3. Turn the ignition key (80) to "0".
4. Remove the handwheels (A, Fig. 3) and the lids (B) by pushing them downwards and pressing on the handwheels.
5. Install the cylindrical brushes (C).
The cylindrical brushes can be installed on either sides.
6. Install the lids (B) and fasten them with the handwheels (A).
7. To remove the cylindrical brushes, perform steps 1 to 6 in the reverse order.
E
A
B
Available cylindrical brushes and their relevant application guides (suggestions only)
Models
General cleaning:
Concrete
Terrazzo fl oor
Ceramic tiles/quarrystones
Marble
Vinyl tiles
Rubber tiles
16
USER MANUAL
C
C
MAGNA GRIT 46 DYNA GRIT 80
9097293000(3)2010-03 A
Figure 3
MIDLITE GRIT 180
BA 651 - BA 751 - BA 851 - BA 751C
C
PROLENE PROLITE
A
B
P100176
UNION MIX