Reinstallation And Reuse; Demolition And Disposal; Electric/Electronic Waste Disposal; Operations And Use - Steinbach WP 14000 Manuel D'installation

E N

5.7 Reinstallation and reuse.

Clean the product and the moving parts accurately before stopping the product for a while, such as, for
instance, during the winter months.
Do not lubricate and/or use detergents and chemical cleaning products.
If there is the risk of freezing, the product must be carefully emptied from the liquids in its hydraulic
circuit. It is advisable to empty all the hydraulic parts.

5.8 Demolition and disposal.

Collecting recyclable material, both those used for packaging (cardboard, nylon,
etc.) and those replaced during maintenance is recommended. Suitable
collection of waste material for recycling, processing and environmentally
compatible disposal contributes in avoiding possible negative effects on the
environment and health and promotes the reuse and/or recycling of product
materials.
Illicit product disposal by the user may be punishable by current international
and/or national laws.
5.8.1

Electric/electronic waste disposal.

EU directive 2012/19/EU classifies this product as an electrical or
electronic tool. The barred bin symbol on the equipment or packaging indicates that the product
must be separated from other waste at the end of its working life. Therefore, the user must take
equipment to electronic and electro-technical waste collection centres at the end of its working life
or return it to the dealer when purchasing similar new equipment, on a one to one basis. Suitable
collection of decommissioned equipment for recycling, processing and environmentally compatible
disposal contributes in avoiding possible negative effects on the environment and health and
promote the reuse and/or recycling of device materials. Illicit product disposal by the user may be
punishable by current national laws.
6

Operations and use.

Do not use glue, sealant or other chemical products on threads or other product parts.
To disconnect the product from the power mains, remove the power plug from the power outlet without
pulling on the power cord.

6.1 Operating description.

The product you purchase is designed to move water in swimming pool. The rotor turns and transfers
water from the inlet to the outlet.

6.2 Application range.

The product cannot be used to purify water for human consumption.
This powerful and reliable product can be used in swimming pool, together with a filter, for water treatment.

6.3 Use.

Cutting and/or altering the power cord is strictly prohibited.
The product cannot be used to purify water for human consumption.
The product cannot be used to purify liquids other than fresh water.
The product cannot be used for medical/therapeutic purposes,
Dry operations are prohibited.

6.4 Operating limits and environmental limits.

•
Maximum water temperature: +35 [°C].
• Minimum water temperature: +4 [°C].

6.5 Safety devices and signalling.

The product is equipped with a thermal protector. Following any thermal protector operation, check the
causes that originated the product's malfunction. For this purpose, please consult the "Troubleshooting"
section.
The product shall go back to normal operating conditions after it has cooled down (about 2÷3 hours) and/or
the caused that triggered the thermal protector have been eliminated.
Nome file:
7528001 - ISTRUZIONI WP - IT-EN-ES-FR-DE-NL-ES
File name:
33-102
Fig. 63
Rev. 0 05/10/2015