Battery Installation - Steinbach WP 14000 Manuel D'installation

E N
Make sure the product complies with your electrical system.
The power outlet must be at a suitable distance from the water but easily accessible in order to be able
to easily turn off the product in the event of fault (electrical socket, at least 3,5 [m] from the edge of the
pool). Cutting the power cord and/or replacing the power plug is strictly prohibited.
The power cord must be positioned to avoid possible damages such as bends and/or cuts.
The cover must be tightly screwed-in before connecting the product to the power mains.
5.6.1

Battery installation.

The product timer is equipped with an internal battery. Remove the protective plastic on the battery upon
use. Proceed as follows:
25. Unscrew the cover fastening screws and remove the cover.
26. Remove the battery.
27. Remove the protective plastic.
28. Reinstall the cover and tighten the fastening screws.
Nome file:
7528001 - ISTRUZIONI WP - IT-EN-ES-FR-DE-NL-ES
File name:
Fig. 54
Fig. 55
Phillips
Fig. 56
Fig. 57
31-102
Rev. 0 05/10/2015