Technogym ROTEX 600 XT PRO Manuel De L'utilisateur page 23

1.3 I
NSTALLATION AND ASSEMBLY
Reinstall the guard on the column with the 6
self-tapping screws 4.8x18.
Insert the foam cushions into the special slots
between the guard and the control panel, in
the direction indicated by the arrows in the
diagram, applying light pressure.
Insert and tighten the 2 rear screws to mount
the tray on the top side of the control panel,
as illustrated.
The equipment is now ready to be hooked
up to the power supply.
D
ANGER
The equipment must be assembled
by a person with general mechanical
skills and experience.
01325003
23
146