KitchenAid 720-0745 Instructions D'installation Et Guide D'utilisation Et D'entretien page 9

Attach Right Side Shelf with Sear Burner
1. Unpack right side shelf with sear burner.
2. Open grill lid.
3. Remove 3 screws from the side of the searing side burner.
A
A. Searing side burner screws
4. Remove the 3 screws on the grill side panel and 1 screw on
the grill control panel.
A. Grill control panel screw
B. Grill side panel screws
5. Lower the side shelf so that the center post (A) slides into the
bracket (B) and align the bottom keyhole slots on the side
shelf with the screw holes on the grill side panel.
A
IMPORTANT: This step is meant to help with the installation,
but do not depend solely on the bracket to hold the weight of
the sear burner.
B
A
B
6. Attach the top of the side shelf to the grill (A) by inserting the
3 screws removed in Step 3 into the side shelf from inside the
grill hood and tighten. See illustration in Step 8.
7. Attach the bottom of the side shelf to the side panel (B and C)
of the grill by inserting the 3 screws removed from the grill
side panel in Step 4. The drip pan may need to be pulled
forward to install the center screw (C). Tighten the screws.
See illustration in Step 8.
8. Attach the side shelf to the control panel (D) by inserting the
screw removed from the grill control panel in Step 4. Tighten
the screw.
A
D
9. Remove the 3 screws from the searing side burner.
10. Remove the searing side burrner.
B
C
9