11. Remove the 2 screws from the side burner valve assembly.
See illustration in Step 13.
12. Push the valve stem out through the opening in the front of
the side burner shelf, lining up the holes in the side burner
valve assembly with the openings on the side burner shelf.
See illustration in Step 13.
13. Slide the bezel opening over the valve stem and attach the
side burner valve assembly and bezel to the side burner shelf
with the screws removed in Step 9.
A
A. Bezel
B. Valve stem
14. Replace the searing side burner, angling it so that the side
burner tube slides over the valve orifice.
10
15. Connect electrical plugs on underside of sear burner.
16. Insert the valve stem into the knob and push knob into place.
B
17. The igniter battery is not factory installed. A "AA" size alkaline
A
A. Electrical plug from grill
B. Electrical plug from sear burner
battery is located in the accessory box on the grill grate.
Install battery at this time following the instructions in
"Replacing the Igniter Battery" section.
B