Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Switching on
GB 8
7
2
1
2
3 4
• Open the door to the dishwasher.
• Press the "on/off" button (1) to switch on the appliance.
The indicator (7) will light up when the machine is switched on.
• Select the desired cycle (see page 10 "cycle selection table").
Select a cycle using the programming buttons (6). The indicator
corresponding to the selected cycle will light up.
• Close the door to the dishwasher. The dishwasher will automatically
start running the selected cycle.
Delayed start
If you want the dishwasher to switch on at a later time, you can used
the "delayed start" button (3). You can choose to delay the start time by
3, 6, 9 or 12 hours. Each press of the button (3) changes the delay time.
The indicators (3) show the delayed start time that has been selected.
Half load program
The dishwasher with Half Load Washing Function adapt to your needs,
so you can save energy consumption, water consumption as well as
cycle duration by loading dishes of half capacity anywhere you prefer.
Selecting the "3-in-1" cycle
The dishwasher features a 3-in-1 cycle. If you select this cycle
(button 4), the dishwasher does not need to be filled with salt and
rinse agent, but rather you use so-called 3-in-1 dishwasher tablets
in their place. A holder for 3-in-1 tablets has been supplied with your
dishwasher.
Note: Only use 3-in-1 tablets in combination with the 3-in-1 wash
cycle. If you use 3-in-1 tablets with other cycles, this will deliver lower
performance in terms of the washing results.
5
6
Publicité
Table des Matières
