Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Switching on
GB 8
1
2
3 4
2
3
• Open the door to the dishwasher.
• Press the "on/off" button (8) to switch on the appliance.
The indicator (9) will light up when the machine is switched on.
• Select the desired cycle (see page 10 "cycle selection table"). Press the
programming button (7) repeatedly to select the required cycle. When
you select a wash cycle, the corresponding indicator (2) will light up.
• Close the door to the dishwasher. The dishwasher will automatically
start running the selected cycle.
Delayed start
If you want the dishwasher to switch on at a later time, you can used the
"delayed start" button (5). You can choose to delay the start time by 3, 6,
9 or 12 hours. Each press of the button (5) changes the delay time. The
indicators (1) show the delayed start time that has been selected.
Selecting a half load
Press the "half load" button (6) to activate the half load cycle. The lower
spray arm is switched off during the half load cycle. This means that you
should only load the upper basket.
Selecting the "3-in-1" cycle
The dishwasher features a 3-in-1 cycle. If you select this cycle (button 6),
the dishwasher does not need to be filled with salt and rinse agent, but
rather you use so-called 3-in-1 dishwasher tablets in their place. A holder
for 3-in-1 tablets has been supplied with your dishwasher.
Note: Only use 3-in-1 tablets in combination with the 3-in-1 wash cycle. If
you use 3-in-1 tablets with other cycles, this will deliver lower performance
in terms of the washing results.
TFI8006
5 6 7
8 9
TFI8004
7
8
9
Publicité
Table des Matières
