Operation; Switching On - ETNA VW339M Mode D'emploi

OPERATION

Switching on

1. Open the dishwaser door.
2. Press the 'on-off' key for 1 second to switch on the device.
▷ Two dashes will appear on the Program Display.
3. Select the program most suitable for your dishes using the
Program key.
▷ The selected program will appear on the Program display (see
'program selection table').
▷ The selected program will display for 3 seconds then its duration
will show for 1 second, alternately.
▷ Additional functions can also be selected.
4. Close the dishwasher door.
▷ The dishwasher will automatically start running the selected
cycle. The remaining program time appears on the display.
Each time the machine is switched off and on, the Eco program will be
set as default. Options chosen before will be cancelled.
Selecting a half load
• Press the 'half load' key to activate the half load cycle. In the half
loading program, you can use both the upper and lower basket and
both baskets simultaneously.
• For a small quantity of dirty dishes, in both the upper and lower
basket, repeatedly press the 'half load' key until the indicators of
upper and lower basket light up.
• For a small quantity of dirty dishes in the upper basket, repeatedly
press the 'half load' key until the indicator of the upper basket
lights up.
• For a small quantity of dirty dishes in the lower basket, repeatedly
press the 'half load' key until the indicator of the lower basket lights
up.
Delayed start time
• If you want the dishwasher to switch on at a later time, you can
use the delayed start key. You can choose between a delay time
of 1 hour up to 19 hours. Each press of the key changes the delay
time.
▷ The display shows the delayed start time.
• Then select the desired program and close the door of the
dishwasher.
EN 7