Technical Data Sheet; Error Codes - ETNA AFI8534ZT Mode D'emploi

ERRORS

Error codes

Problem
The "quick cycle" indicator is
flashing.
The "eco cycle" indicator is
flashing.

Technical data sheet

Potential causes
Water intake time is too long.
Appliance overfilled
Should the appliance become overfilled or exhibit excessive leaking,
shut off the inlet tap and alert the service department.
Capacity
Height
Width
Depth
Noise level
Power supply
Connected load
Connected load off-mode
Connected load stand-by
Water pressure
Energy rating
Annual energie consumption
Energie consumption standard
cleaning cycle
Annual water consumption
Drying efficiency class
Standard cleaning cycle
Program duration standard
cleaning cycle
Weight (Net)
Solution
Inlet tap not opened.
Water supply is excessive.
12 place settings
820 mm
595 mm
540 mm
47 dB (A) re 1 pW
230 V, 50 Hz
1930 W
0 W
0,6 W
0,4-10 bar) - 0,04-1 MPa
A+
291 kWh
1,02 kWh
3360 liter
A
ECO 50 °C
165 min.
45 Kg
GB 23