Error Codes; Technical Data Sheet - ETNA EVW870RVS Mode D'emploi

ERRORS

Error codes

Problem
The "quick cycle" indicator is
flashing.
The "glassware cycle" indicator
is flashing.
The "eco cycle" indicator is
flashing.

Technical data sheet

Potential causes
Water intake time is too long.
Pumping out the water is taking too long.
Should the appliance become overfilled or exhibit excessive leaking,
shut off the inlet tap and alert the service department. If all indicators
are flashing simultaneously: switch off the dishwasher immediately,
shut off the inlet tap and alert the service department.
Sheet of household dishwasher according to EU Directive 1059/2010:
Manufacturer
Type / Description
Model
Standard place settings
Energy efficiency energy efficiency class (1)
Annual energy consumption (2)
Cleaning efficiency class
Drying efficiency class (4)
Energy consumption of the standard cleaning cycle
Standard cleaning cycle
Program duration of the standard cleaning cycle (5)
Power consumption of off-mode
Power consumption of standby-mode
Annual water consumption (3)
Noise level
Mounting
Height
Width
Depth (with connectors)
Solution
Inlet tap not opened.
Drainage hose outlet is too high.
Note the code and alert the service
department.
Etna
EVW870RVS
EVW870RVS/E01
12
A+
291 KWh
A
A
1.02 KWh
ECO 50 ºC
170 MIN.
0.45 W
0.49 W
3360 L
49 dB(A) re 1pW
Built-under
81.5 cm
59.8 cm
57.0 cm
EN 23