ERRORS
Error codes
Problem
E1
E4
Technical data sheet
Potential causes
Water intake time is too long.
Appliance overfilled.
Should the appliance become overfilled or exhibit excessive leaking,
shut off the inlet tap and alert the service department.
Capacity
Height
Width
Depth
Noise level
Power supply
Connected load
Connected load off-mode
Connected load stand-by
Water pressure
Energy rating
Annual energie consumption
Energie consumption standard
cleaning cycle
Annual water consumption
Drying efficiency class
Standard cleaning cycle
Program duration standard
cleaning cycle
Solution
Inlet tap not opened or water pressure too low.
Note the code and alert the service
department.
12 place settings
820 mm
595 mm
540 mm
47 dB (A) re 1 pW
230 V, 50 Hz
1760-2100 W
0 W
0,75 W
0,4-10 bar) - 0,04-1 MPa
A+
291 kWh
1,02 kWh
3360 liter
A
ECO 50 °C
165 min.
EN 23