Damage To Glassware And Other Crockery; Filter System - ETNA TI8022RVS Mode D'emploi

Masquer les pouces Voir aussi pour TI8022RVS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION

Damage to glassware and other crockery

Filter system

Potential causes:
• Type of glass or manufacturing process. Chemical composition of
the dishwasher detergent.
• Water temperature and duration of the wash cycle.
Proposed solution:
• Use glassware and porcelain crockery produced by manufacturers
that state that it is suitable for dishwashers.
• Use a milder/less corrosive dishwasher detergent. If needed, ask
detergent manufacturers for more information.
• Select a wash cycle with a lower temperature.
• Remove glassware and cutlery from the dishwasher as soon as
possible after the cycle has finished, to prevent damage.
Depending on usage, the filters may require regular rinsing under a
tap. The filter system consists of three components: the large filter, the
coarse filter and the fine filter.
1. Large filter: Leftover food and waste that lands on this filter is
rinsed through to the coarse filter by a special jet on the lower spray
arm.
2. Coarse filter: Larger articles, such as leftover bones or pieces of
glass that could block the drain, are trapped in the coarse filter. In
order to remove the waste from the filter, you must lightly squeeze
the lips on top of the filter together and then pull the filter upwards.
3. Fine filter: This filter prevents waste and leftover food from entering
the drainage pump and ensures that said leftovers are not spread
over the dishes again during the cycle.
EN 19

Publicité

Table des Matières
loading

Table des Matières