Error Codes - ETNA TFI8018 Mode D'emploi

ERRORS

Error codes

Problem
Code E1 is showing in the
display
Code E3 is showing in the
display
Code E4 is showing in the
display
Code E6 is showing in the
display
Code E7 is showing in the
display
GB 24
Potential causes
Water intake time is too long.
Warm-up time too long, required temperature
not reached
Should the appliance become overfilled or exhibit excessive leaking,
shut off the inlet tap and alert the service department.
Solution
Inlet tap not opened.
Faulty temperature sensor or heating
element. Note the code and alert the service
department.