IWC Schaffhausen INGENIEUR CHRONOGRAPH Mode D'emploi page 31

— 3 1 —
R E A D I N G T H E C H R O N O G R A P H
Chronograph seconds hand: The scale for the central chrono­
graph seconds hand runs around the edge of the dial.
Minute counter: The 30­minute scale with a slow jumping hand
is situated on the subdial at 12 o'clock. This hand makes two
complete revolutions in one hour.
Hour counter: The 12­hour scale with short lines for the 30­minute
indication and with a continuous hand is situated on the subdial
at 9 o'clock.
U S I N G T H E C H R O N O G R A P H
Start: To start the chronograph, press the start/stop push­button.
Stop: To stop the chronograph, press the start/stop push­button
again.
Reset: Press the reset push­button. This will reset all the chrono­
graph hands to zero.
Aggregate time recording: You can add stop times together by
pressing the start/stop push­button again after the first measure­
ment instead of the reset push­button.
I N G E N I E U R C H R O N O G R A P H