Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Notes:
–
Attach the adjusting rail to the furniture door with at least
10 screws. One screw should be inserted under each
double threaded bolt.
–
The adjusting rail features a variety of holes for the many
different design options of furniture doors. Always screw
into the best load-bearing material of the furniture door.
24. Attaching and aligning the furniture
door (freezer compartment)
̈
Hang the furniture door on the double threaded bolt.
̈
Align the furniture door with the double threaded bolts
(Torx screwdriver).
̈
Transfer the middle drill holes along the outer edge of
the appliance door to the furniture front and mark.
̈
Remove the furniture door.
̈
Using the positioning aid, set both longitudinal sides of
the furniture door parallel.
̈
Using a square, extend the drill hole marks which you
have just made to the vertical marks.
̈
Mark and drill the holes.
̈
Screw on the fixing plates (10x).
31
Publicité
Table des Matières
