Specifications; Product Specifications - Sharp PN-655E Mode D'emploi

Specifications

Product Specifications

Model
LCD element
Max. resolution (pixels)
Max. colours
Pixel pitch
Viewing angle
Screen active area
Computer Video
input Sync
signal
Plug and play
Power management VESA DPMS, DVI DMPM
Video colour system
Input terminals
Output terminals
Installation
Power requirement
Power consumption
Surrounding Operating temperature range 0°C to 40°C
environment Operating humidity range
Dimensions (monitor unit only)
Weight
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product imporovement without prior notice.
The performance specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
54
E
PN-655E
65" wide (163.9 cm diagonal) ASV low-reflection black TFT LCD
1920 x 1080
16.77 M colours (8 bits/colour)
0.744 mm (H) x 0.744 mm (V)
170° right/left/up/down (contrast ratio ≥10)
mm 1428 (H) x 804 (V)
Analogue RGB (0.7Vp-p) [75Ω], Digital (DVI 1.0 standard-compliant)
Horizontal/Vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
VESA DDC2B
PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz)
Computer signal
Computer audio
RS-232C
Composite video
Component
Audio
Computer signal
RS-232C
Audio
Speaker
mm Secured at 4 points (pitch: 650(V), 440(H))(M10 screws)
AC 100V - 240V, 50/60Hz
550 W (2.0 W in input signal waiting mode, 2.0 W in standby mode)
20% to 80% (no condensation)
mm Approx. 1,572 x 126 x 923 (excluding protrusions)
kg Approx. 65 (excluding the temporary stand)
Analogue Mini D-sub 15 pin (3 rows) x 1
Digital DVI-D 24 pin x 1
3.5 mm mini stereo jack x 1
D-sub 9 pin x 1
BNC x 1
BNC (Y, Cb/Pb, Cr/Pr) x 1
RCA pin (L/R) x 1
Digital DVI-D 24 pin x 1
D-sub 9 pin x 1
RCA pin (L/R) x 1
10 W + 10 W [6Ω]