Sharp PN-655E Mode D'emploi page 33

MODE SELECT 2
[OFF TIMER]
Function Specifies the remaining time before turning off the power (entering standby mode)
(see page 21).
Adjustable range 0 - 23 (hours)
Default 0
[OSD H-POSITION]
Function Adjusts the horizontal display position of menu screen.
How to adjust Use
Default Centre
[OSD V-POSITION]
Function Adjusts the vertical display position of menu screen.
How to adjust Use
Default Centre
[ID No. SET]
Function Assigns ID numbers to monitors connected in a daisy chain (see page 38), using
RS-232C cables.
Adjustable range 0 - 255
Default 0
Note The numbers 1 to 255 are available for ID numbers. (If "0" is set, the system
regards this as the state where no ID number is set.) Although numbers up to 255
can be used for monitor IDs, the number of connectable monitors varies depending
on the length of RS-232C cables and the installation environment.
Use
[LANGUAGE]
Function Switches the OSD language.
Available languages ENGLISH / DEUTSCH / FRANÇAIS / ITALIANO / ESPAÑOL
Default ENGLISH
[COLOR SYSTEM]
Function Select the colour system of the AV equipment which is connected to the composite
video input terminal. When AUTO is selected, the colour system is automatically
set according to the input signal.
Available formats AUTO / PAL / PAL-60 / SECAM / NTSC3.58 / NTSC4.43
Default AUTO
/ to move menu screen.
/ to move menu screen.
/ to increase or decrease values.
31
E