Initialisation (Reset)/Functional Restriction Setting - Sharp PN-655E Mode D'emploi

Initialisation (Reset)/Functional Restriction Setting

You can return contrast, image quality, and other settings to their factory-preset values, specify whether
power LEDs lights, and enable control via RS-232C (see page 37) among other functions.
1.
After pressing
The FUNCTION 1 screen will appear.
2.
Select and set the items you want.
[ALL RESET]
Function
[ADJUSTMENT LOCK]
Function
Default
LOCKED
UNLOCKED
[OSD DISPLAY]
Function
Default
ON
OFF
[LED]
Function
Default
ON
OFF
[RS-232C]
Function
Default
LOCKED
UNLOCKED
MENU
3.
Press to return to the normal screen.
26
E
SIZE
for about 5 seconds, press
Resets all settings of the monitor to their factory preset values. After initialisation
(reset), turn the main power switch off and then back on.
Specifies whether to lock settings such as ADJUSTMENT and WHITE BALANCE.
While locked, the remote control unit cannot perform operations other than turning
power on/off (POWER button) and displaying the FUNCTION 1 screen.
UNLOCKED
Locks the setting.
Unlocks the setting.
Hides/shows menus. The FUNCTION 1 screen cannot be hidden.
ON
Displays the menus.
Hides the menus.
Specifies whether to light power LEDs.
ON
Lights power LEDs.
Does not light power LEDs.
Specifies whether to allow control via RS-232C (see page 37).
UNLOCKED
Disables control via RS-232C.
Enables control via RS-232C.
, , , and in that order.