Initialization (Reset)/Functional Restriction Setting - Sharp PN-G655U Mode D'emploi

Initialization (Reset)/Functional Restriction Setting

You can return the settings to their factory-preset values and
restrict operations.
SIZE
1. After pressing
, , and
FUNCTION
ALL RESET
ADJUSTMENT LOCK
OSD DISPLAY
LED
RS-232C
2. Select and set the items.
ALL RESET
Resets the settings to the factory default settings.
Press , select "ON" and then press
After initialization, turn the main power switch off and
then back on.
ADJUSTMENT LOCK
You can disable operations on the monitor and the
remote control unit that use buttons.
OFF ...Enables operation.
1 ........Disables all operations other than turning power
on/off and FUNCTION.
2 ........Only the FUNCTION operation is enabled.
Disables all operations other than FUNCTION (not
even power on/off).
OSD DISPLAY
Hides/shows menus.
The FUNCTION screen cannot be hidden.
ON ...........Displays the menus.
OFF .........Hides the menus.
LED
Specifies whether to light power LEDs.
ON ...........Lights power LEDs.
OFF .........Does not light power LEDs.
RS-232C
Specifies whether to allow control via RS-232C (see
page 25).
LOCKED .............Disables control via RS-232C.
UNLOCKED........Enables control via RS-232C.
MENU
3. Press to return to the normal screen.
24
E
for about 5 seconds, press
in that order.
1/1
OFF
ON
ON
UNLOCKED
END···[MENU]
MENU
.
,