Connecting External Speakers; Connecting The Speaker Cables - Sharp PN-655E Mode D'emploi

Connecting External Speakers

Be sure to use external speakers with an impedance of 6 ohms and a rated input of at least 10 W.
External speaker terminals (right)

Connecting the speaker cables

1. While pushing the tab, insert the tip of the cable.
2. Release the tab.
Make sure to connect the speaker terminal and cable polarity ( ,
The speaker terminals have plus
The speaker cables are also divided into plus and minus.
When connecting the left/right speakers, be sure to connect the plus/minus terminals with the correct
cables.
16
E
Black
Red
1.
and minus
Rear view
Red
External speaker terminals (left)
2.
polarity. Plus is red and minus is black.
) properly.