Rs-232C Command Table - Sharp PN-655E Mode D'emploi

PC Operation

RS-232C command table

<How to read the command table>
Command:
Direction:
Parameter:
Reply:
* "Yes" indicates commands which can be used in power standby mode.
Power control/Input mode selection
Control item
POWER CONTROL
INPUT MODE SELECTION
46
E
(Continued)
Command field (See page 39.)
W When the "Parameter" is set in the parameter field (see page 39), the
command functions as described under "Control/Response Contents".
R The returned value indicated under "Reply" can be obtained by setting
"????", " ?" or "???+" (repeater control) in the parameter field (see
page 39).
Parameter field (See page 39.)
Response (Returned value)
Command Direction Parameter
0
W
1
POWR
R
0
1
W 2
3
INPS 4
R
Reply Control/Response contents
Switches to standby mode.
Returns from standby mode.
0 Standby mode
1 Normal mode
2 Input signal waiting mode
Toggle change for input mode
PC digital RGB (DVI-D) (DIGITAL)
PC analogue RGB (ANALOG)
Component (COMPONENT)
Video (VIDEO)
1 PC digital RGB (DVI-D) (DIGITAL)
2 PC analogue RGB (ANALOG)
3 Component (COMPONENT)
4 Video (VIDEO)
*
Yes
Yes