Inventum VVW7080BS+++ Manuel D'utilisation page 49

ADJUSTING THE HEIGHT OF THE UPPER BASKET
The complete upper basket can be moved to create more space in the upper basket or in the lower basket. When the
upper basket is in the upper position, you can place large items, such as pots and large plates, in the lower basket.
When the upper basket is in the lower position, you can place large plates in the upper basket.
1. Open the latch (A) on both guiding rails.
2. Remove the basket from the guiding rails.
3. Put the runners in the guiding rails:
a. Put the upper runners (B) in the guiding rails to put the basket in the lower position.
b. Put the lower runners (C) in the guiding rails to put the basket in the upper position.
4. Push the basket back in the guiding rails.
5. Close the latch on both guiding rails.
FOLDING THE RACKS OF THE UPPER BASKET
The racks can be folded down to create more space in the upper basket, for example to place large items (pots,
pans, etc.) in the basket. The racks can be folded separately or all together.
1. Push the racks (A) to fold them down.
2. Pull the racks upwards to put them in the up position.
FOLDING THE RACKS OF THE LOWER BASKET
The racks can be folded down to create more space in the lower basket, for example to place large items (pots,
pans, etc.) in the basket. The racks can be folded separately or all together.
1. Push the racks (A) to fold them down.
2. Pull the racks upwards to put them in the up position.
REMOVING THE CUTLERY DRAWER
The cutlery drawer can be removed to create more space in the upper basket or it can be removed for easy loading.
1. Open the latch (A) on both guiding rails.
2. Remove the cutlery drawer from the guiding rails.
STARTING THE APPLIANCE
1. Push the on/off button to start the appliance. The indicator on the on/off button goes on.
CHOOSING A PROGRAM
Note:
For an overview of the programs, refer to section
Note:
If you used an extra option with the previous program, this option will remain activate for the new
program.
1. Use the program selector button to choose a program. The display shows the selected program and the duration.
2. Use the timer button to delay the start time of the program. Refer to section
3. Use the options button to browse through the options.
4. Use the select button to add an option to the selected program.
Note:
If an option is not compatible with the selected program, a buzzer sounds.
'Programs'
.
'Delaying the program'
(Figure 21)
(Figure 22)
(Figure 23)
(Figure 24)
(Figure 25)
.
English • 49