Operating The Camera With The Rm-C950 Remote Control Unit - Sony DXC-H10/OL Mode D'emploi

Operating the Camera with the RM-
C950 Remote Control Unit
When the RM-C950 remote control unit is used with this
camera, the names and functions of the PRINT, FLASH and
LONG EXPOSURE buttons and the GAIN control change
as follows, in accordance with the functions of the camera.
Functions of the PRINT, FLASH and LONG
EXPOSURE buttons and GAIN control on the
RM-C950
Buttons/control Button/control
on the RM-C950 names when used
with the camera
PRINT —
FLASH BLACK
LONG SHUTTER SPEED
EXPOSURE
GAIN
GAIN
Function
Does not function with
this camera
Use to start the auto black
balance adjustment.
Use to set the shutter
speed without displaying
the menu when
SHUTTER is set to STEP
or MANU in the menu.
Use to set the gain level
to 0 dB, 6 dB, 12 dB or
AGC.
Attaching the supplied name sheet
The sheet for the button names when the camera is used
with the remote control unit is supplied with the camera.
Attach the name sheet to the control panel of the RM-C950.
1
Before attaching, clean the control panel of the RM-
C950.
2
Peel off the adhesive sheet at the back of the name sheet
and attach the name sheet to the panel.
Chapter 3 Installation and Connections
43
(EN)