Mounting A Microscope Adaptor; Mounting On A Tripod; Mounting To A Wall Or Ceiling - Sony DXC-H10/OL Mode D'emploi

Installation

Mounting a Microscope Adaptor

To attach the camera to a microscope, an operating
microscope, etc., it is necessary to mount an appropriate
adaptor. The method for mounting the adaptor is the same as
for the lens.
For details, refer to the manual for each adaptor.

Mounting on a Tripod

To mount the camera on a tripod, use the screw hole on the
top or bottom panel.
Mounting screw to be used
U1/4", 20 UNC
n = 4.5 mm ± 0.2 mm (ISO standard)
n = 0.197 inches (ASA standard)

Mounting to a Wall or Ceiling

To attach the camera on a wall or ceiling, use the
appropriate bracket and mounting screws (1/4", 20 UNC).
40
(EN) Chapter 3 Installation and Connections