Adjusting The White Balance - Sony DXC-H10/OL Mode D'emploi

Adjusting the White Balance

Each time the lighting conditions change, be sure to adjust
the white balance so that optimum color reproduction is
obtained.
1, 3 2
BARS button
MENU FUNCTION DATA
UP
BARS
DOWN
FREQ
60 59.94
7
FLASH
CTRL
IRIS
WHITE
LENS
BLACK
MONITOR
CAMERA ADAPTOR
Operation procedure
1
Press the MENU button repeatedly until the PAGE 2/3
menu appears on the screen.
2
Set WHT. BAL to AWB.
PAGE 2/3
"WHT.BAL : AWB ATW MANU
R.PAINT: 0
B.PAINT: 0
C.TEMP : 3200 5600
MAS.PED : 0
R.PED : 0
B.PED : 0
MATRIX : ON OFF
DETAIL : ON OFF
LEVEL : 0
3
Press the MENU button twice to turn off the menu.
4
Display the camera image on the monitor screen.
Note
If a color bar signal is displayed on the screen, press the
BAR button to turn it off.
5
Set the lens iris control as follows.
When using an auto-iris lens: Set to auto-iris control.
When using a manual-iris lens: Set to an appropriate
iris opening value.
(Continued)
31
Chapter 2 Operation (EN)