Sony DXC-H10/OL Mode D'emploi page 73

Function
Selection
Controls the image pickup start point and output
R. R
timing with an external trigger signal, which allows
(Restart/
you to accurately capture the object to be shot from
reset)
a fixed location. You can also modify the charge
time for long-term exposure.
This mode can be used with other SHUTTER modes
if the SPEED value is set in the range from 1H to
560H, but normally set SPEED to OFF.
EXT. TRIG With an external trigger signal a field image and the
(External WE pulse are output.
trigger) When you use the camera together with an external
frame memory, you can capture a field still image
the instant an external trigger signal is input. This is
useful for shooting a fast-moving object accurately
from a fixed location.
You can set the SPEED value in units of 1H
(horizontal scanning time) in the range from 1H to
560H.
Selection Function
LTR With an external trigger signal a field image and the
(Long-Term WE pulse are output. When you use the camera
Reset) together with an external frame memory, you can
capture a field still image the instant an external
trigger signal is input. This mode is also useful for
shooting a fast-moving object accurately from a fixed
location.
The shutter speed is determined according to the
pulse width of an external trigger signal.
The SPEED display indicates "- - -".
Note
The R. R, EXT. TRIG. and LTR modes function when the menu is
turned off.
The camera does not accept the external trigger signal while any
menu is displayed.
19
Chapter 2 Operation (EN)