Replacing/Removing The Landing Gear - Horizon Hobby Night Vapor Ultra Micro Série Manuel D'utilisation

14

Replacing/Removing the Landing Gear

To remove the landing gear, follow these steps:
1. Gently grasp the landing gear base and pull the landing gear out of the mounts.
Note: It may be difficult to remove the landing gear the first time.
2. Push the new landing gear legs into the mounting columns until the landing gear clicks into place.
Note: For slower flight, the model can be flown without the landing gear if desired. It is recommended
to slide the battery forward to compensate for the weight of the landing gear.