Hooking Up The System - Sony CDP-CX88ES Mode D'emploi

Hooking Up the System

Overview
This section describes how to hook up the CD player to
an amplifier. Be sure to turn off the power of each
component before making the connections.
Transmitter/receiver
To S-LINK/CONTROL A1
jack
To S-LINK/CONTROL A1
jack
To an AC outlet
To line output (L) To line output (R)
To audio input
: Signal flow
What cords will I need?
Audio cord (1) (supplied)
White
(L)
Red
(R)
AC adapter (1) (supplied)
Hookups
When connecting the audio cord, be sure to match the
color-coded cords to the appropriate jacks on the
components: Red (right) to Red and White (left) to
White. Be sure to make connections firmly to avoid
hum and noise.
To an AC outlet
• To connect the transmitter/receiver
DIGITAL OUT
(OPTICAL)
CD player
COMMAND MODE
• If you have a Sony receiver (amplifier) equipped with
Amplifier
To an AC outlet
White
(L)
Red
(R)
Getting Started
Getting Started
CD player
AUX LINE
IN OUT
L L
R R
Connect the transmitter/receiver to an AC outlet using a
AC adapter (supplied) and via the S-LINK CONTROL A1
jack using a monaural mini-plug cord (supplied).
Transmitter/receiver
DC IN 6V
Transmitter/receiver
CD player
S - L I NK
CONTROL A1
the CONTROL A1 jack
Be sure to connect the player to the CD IN jacks on the
receiver (amplifier). When making this connection, set the
COMMAND MODE of the player to CD1 (see the
illustration on the next page). If you further connect the
player and the receiver (amplifier) via the CONTROL A1
jacks with the monaural (2P) mini-plug cord, you can use
the Auto Function feature between these components. For
details, refer to the supplementary "S-LINK
A1 Control System" instructions and the instructions
supplied with the receiver (amplifier).
Playing CDs
Amplifier
INPUT
CD
L
R
To an AC outlet
CONTROL A1
TM
/CONTROL-
EN
5