EUFAB 11594 Notice D'utilisation page 5

Place the new wheel rail for wide tyres onto the support table
(Figure 3) and fasten it with the new bolts and nuts.
Place the plastic cap back onto the nut.
Figure 3: Inserting the wheel stopper
The heaviest bicycle must always be transported on
the rail nearest to the vehicle.
Insert the short tensioning strap from the inside to the outside
under the wheel holder and then from the outside to the inside
through the slots of the wheel holder (Figure 4).
Figure 4: Installing the tensioning belts
6. MAINTENANCE AND CARE
Clean the wheel rails using a slightly moist, soft cloth and a mild
cleaning agent. Do not use aggressive cleaning agents, solvents
or petrol. Store the wheel rails in a dry place.
7. NOTES REGARDING ENVIRONMENTAL PROTECTION
Please dispose of the wheel rails via the recycling bin or the
public/municipal collection points.
The materials are recyclable. You make an important
contribution to protecting our environment by recycling,
material utilisation or other forms of reusing waste equipment.
8. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
5