EUFAB 11594 Notice D'utilisation page 4

Wheel rails for wide tyres CROW
CONTENTS
1. PROPER USE OF THE PRODUCT _______________ 4
2. SCOPE OF DELIVERY ______________________ 4
3. SPECIFICATIONS ________________________ 4
4. SAFETY PRECAUTIONS ____________________ 4
5. OPERATING INSTRUCTIONS _________________ 4
6. MAINTENANCE AND CARE __________________ 5
7. NOTES REGARDING ENVIRONMENTAL PROTECTION __ 5
8. CONTACT INFORMATION ___________________ 5
WARNING!
Please read the operating instructions carefully
prior to use and observe all safety instructions!
Not observing these may lead to personal injury,
damage to the device or to your property!
Store the original packaging, the receipt and these
instructions so that they may be consulted at a later
date! When passing on the product, please include
these operating instructions as well.
Please check the contents of package for integrity
and completeness prior to use.
1. PROPER USE OF THE PRODUCT
The wheel rail set is used to attach bicycles with wide tyres in
widths of up to 82 mm onto a bike rack. The set replaces the
standard wheel rails of EUFAB CROW bike racks
CROW Item number 11563
CROW BASIC Item number 11569
CROW PLUS Item number 11564
This device is not designed to be used by children or persons
with limited mental abilities or without experience and/or lack
of required specialist knowledge. Keep children away from the
device.
The device is not designated for commercial use.
Utilisation according to the intended purpose also includes the
observance of all information in these operating instructions,
particularly the observance of the safety instructions. Any other
utilisation is considered to be contrary to the intended purpose
and may lead to material damage or personal injuries. EAL GmbH
assumes no liability for damage resulting from improper use.
2. SCOPE OF DELIVERY
2 wheel rails 1 instruction manual
3 tensioning straps 1 bolt set
3. SPECIFICATIONS
For Crow, Crow Basic and Crow Plus bike racks
Tyre width 2.2" to 3.25", 56 mm to 82 mm
4
4. SAFETY PRECAUTIONS
• The warning triangle sign indicates all
instructions which are important for safety.
Always follow these otherwise you could injure
yourself or damage the device.
• Children may not play with the device.
• Cleaning and user maintenance may not be
carried out by children without supervision.
• Do not treat packaging material carelessly. It may
become a dangerous plaything for children!
• Only use this product for its designated purpose!
• Do not manipulate or disassemble the device!
• For your own safety, only use accessories and
spare parts that are stated in these instructions or
that are recommended by the manufacturer!
• Please observe the speci cations and safety
instructions in the instruction manual of your bike
rack!
5. OPERATING INSTRUCTIONS
Before you can replace the wheel rail set, rst remove the
standard wheel rail on your bike rack. Take the bicycles o the
bike rack.
Remove the plastic cap on the hinge of the wheel rail that you
would like to replace (Figure 1).
Figure 1: Removing the plastic cap
Then loosen the nut of the hinge bolt. Pull the bolt out of the
hinge (Figure 2).
Remove the wheel rail.
Figure 2: Removing the hinge bolt