Connection - JVC KD-AR959BS Manuel D'instructions

Wiring connection (for KD-AR959BS)
Vehicle dashboard
Factory wiring
harness (vehicle)
Blue: To power antenna
Blue/white: To amplifier
Vehicle-specific Wiring
Harness (separately
purchased)
For more information:
Metra Electronics:
www.metraonline.com
Scosche Industries:
www.scosche.com
Rear output
Front output
Subwoofer output
Antenna terminal
To the steering
Light blue/yellow
wheel remote
STEERING
control adapter
WHEEL
REMOTE
Recommended
Join the same color wires together.

connection

Blue/white: Remote (200 mA max.)
Orange/white: Illumination
(Not used) Insulate to prevent short circuit
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
White: Front speaker (left)
White/black
Gray: Front speaker (right)
Gray/black
Green: Rear speaker (left)
Green/black
Purple: Rear speaker (right)
Purple/black
Signal cord (not supplied)
MIC (Microphone input
Fuse (10 A)
terminal) ( 13)
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 11)
Ignition switch
Car fuse block
Separate
red wire
Make this connection if your
vehicle factory wiring harness
does not have "12 V ignition
switch" wire.
JVC Amplifier
Remote wire
(not supplied)
ENGLISH | 27