Playback
Settings for Playback
This section describes the required settings and operations to perform
playback on this unit.
For details on connection, see "Connections" on page 35 (GB).
DSR-50/50P
1
1
Turn on the POWER switch.
2
Turn on the power to the video monitor and set the switches of the
monitor as shown below.
Switch
Setting
75 Ω
ON (or attach a 75 Ω terminator)
Input switch
Set according to the type of input signal from this unit.
Video monitor
2
Chapter 3 Playback and Recording
53
(GB)