Service Window; Displaying The Service Window; White Balance; Registration Adjust - Sony SRX-R110 Manuel D'installation

Note
While a built-in test pattern is displayed on the screen, you
cannot change the screen mode and input select mode, and
cannot adjust the "PICTURE CONTROL" and "COLOR/
FRAME."

SERVICE Window

The SERVICE window is used for adjustment by qualified
service personnel.

Displaying the SERVICE Window

When you click the SERVICE button in the Control
Function Menu window, the authentication dialog opens.
Enter the password in the Password text box, then click
"OK."
The default setting of the password is "service."
The SERVICE window is displayed.

WHITE BALANCE

Changes the preset values of "CUSTOM1," "CUSTOM2,"
"CUSTOM3" and "CUSTOM4" for "Color Temp" in the
COLOR/FRAME window.
Adjust each of Gain R (red)/G (green)/ B (Blue) and Bias
R (red)/G (green)/ B (Blue) to obtain the desired color
temperature.
Notes
• "WHITE BALANCE" can be adjusted only when the
screen mode is set to single screen mode.
• The adjusted values affect "Color Temp" only for the
currently selected input signals.

REGISTRATION ADJUST

A red and blue picture element can be moved for
registration up to two picture elements vertically and
horizontally.
Click the On radio button to enable you to move a red and
blue picture element. When you click the Off radio button,
you cannot move a picture element.
H: Moves the picture elements horizontally.
When you click the R
move a red picture element right or left up to two
or button, you can
SERVICE Window
25
GB