Seat Deflate; Alerts; Warmer Adjust - arjo First Step Select Manuel D'utilisation

Masquer les pouces Voir aussi pour First Step Select:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Seat De ate
Use seat de ate to assist patient exit and bedpan placement by lowering pressure in body section. Seat de ate will
automatically deactivate after 15 minutes. Screen will ash every 5 seconds in the last 15 seconds before deactivation.
1.
Press the SEAT DEFLATE ON/OFF button shown at right.
Display shown at right will appear and ash until seat de ate is deactivated.
2.
Press the SEAT DEFLATE ON/OFF button to deactivate seat de ate. Display shown
at right will appear temporarily and then return to the home display. Pressure and
warmer settings will be restored when seat de ate is deactivated.

Alerts

Use InstaFlate to assist patient transfer and bathing by increasing pressure throughout
the therapeutic surface. InstaFlate will automatically deactivate after 15 minutes. The
Insta ate screen will ash every 5 seconds in the last 15 seconds before deactivation.
Display shown at right will appear and ash until InstaFlate is deactivated.
Use seat de ate to assist patient exit and bedpan placement by lowering pressure in
body section. Seat de ate will automatically deactivate after 15 minutes. The seat de ate
screen will ash every 5 seconds in the last 15 seconds before deactivation.
Display shown at right will appear and ash until seat de ate is deactivated.

Warmer Adjust

Use warmer adjust to set three optional levels of comforting heat when desired. Use only under direction of patient's
physician.
1.
Press WARMER ADJUST button shown at right.
The display shown at right will appear.
2.
Press the right arrow button to activate warmer .
3.
To deactivate the warmer, press and hold the left arrow button until the display reads WARMER OFF.
4.
The panel displays a sliding scale that identi es the level of selected warmth.
5.
Use the right and left arrow buttons to increase or decrease warmth.
6.
As warmth is increased or decreased, LED readout displays LOW, MEDIUM or HIGH
accordingly.
16
SOFT
FIRM
INSTAFLATE
ON/OFF
SEAT
DEFLATE
ON/OFF

SEAT DEFLATE

SEAT DEFLATE OFF
INSTAFLATE
SEAT DEFLATE
SOFT
FIRM
INSTAFLATE
ON/OFF
SEAT
DEFLATE
ON/OFF
WARMER: OFF
PRESS
TO TURN ON
LOW
MEDIUM
PRESSURE
ADJUST
WARMER
ADJUST
PRESSURE
ADJUST
WARMER
ADJUST
HIGH

Publicité

Table des Matières
loading

Table des Matières