Important Details For Your Information - WIKA E-10 Mode D'emploi

1. Important details for your information

1. Important details for your information
Read these operating instructions before installing and starting the pressure transmitter. Keep
the operating instructions in a place that is accessible to all users at any time.
The following installation and operating instructions have been compiled by us with great care
but it is not feasible to take all possible applications into consideration. These installation and
operation instructions should meet the needs of most pressure measurement applications.
If questions remain regarding a specific application, you can obtain further information:
Via our Internet address www.wika.de / www.wika.com
■
The product data sheet is designated as APE E-10
■
Contact WIKA for additional technical support (770) 513 8200
■
If the serial number on the case and/or the 2D code on the hexagon gets illegible (e.g. by
me-chanical damage or repainting), the retraceability of the instrument is not possible any more.
WIKA pressure transmitters are carefully designed and manufactured using state-of-the-art
technology. Every component undergoes strict quality and environmental inspection before
assembly and each instrument is fully tested prior to shipment.
Intended use
Use the explosion proof pressure transmitter to transform the pressure into an electrical signal in
hazardous areas.
FM and CSA certification
Pressure transmitter for operation in hazardous areas in compliance with the respective certifi-
cate (see Control drawing No. 2323872, section 12).
FM and CSA Approval ratings:
Explosion proof:
Dust-ignitionproof: Class II, Division 1, Groups E, F, and G; Class III, Division 1
WIKA operating instructions, models E-10, E-11
Class I, Division 1, Groups A, B, C and D
US
3