A Quick Overview For You; Signs, Symbols And Abbreviations - WIKA E-10 Mode D'emploi

1. Important details ... 3. Signs, symbols and abbreviations
Knowledge required
Install and start the pressure transmitter only if you are familiar with the relevant regulations and
directives of your country and if you have the qualification required. You have to be acquainted
with the rules and regulations on hazardous areas, measurement and control technology and
electric circuits, since this pressure transmitter is „electrical equipment". Depending on the
operating conditions of your application you have to have the corresponding knowledge, e.g. of
aggressive media.

2. A quick overview for you

If you want to get a quick overview, read Chapters 3, 5, 7 and 10. There you will get some short
safety instructions and important information on your product and its starting. Read these
chapters in any case.

3. Signs, symbols and abbreviations

WARNING!
Potential danger to life or of severe injuries.
WARNING!
Instructions for hazardous areas: "Potential danger of explosion, to life or of severe
injuries!
Notice
Important information, malfunction.
4
WIKA operating instructions, models E-10, E-11
US