7. Starting, operation / 8. Maintenance, accessories
Functional test
The output signal must be proportional to the pressure. If it is not, this might point to a damage of
the diaphragm. In that case refer to chapter 9 „Troubleshooting".
WARNING!
Open pressure connections only after the system is without pressure!
■
Observe the ambient and working conditions outlined in section 7
■
data.
Please make sure that the pressure transmitter is only used within the over load
■
threshold limit at all times!
When touching the pressure transmitter, keep in mind that the surfaces of the
■
instrument components might get hot during operation.
8. Maintenance, accessories
WIKA pressure transmitters require no maintenance.
■
Have repairs performed by the manufacturer only.
■
Accessories
For details about the accessories (e. g. connectors), please refer to WIKA's price list, WIKA's
product catalog on CD or or contact our sales department.
14
WIKA operating instructions, models E-10, E-11
US
„Technical