EINHELL SPK9 Instructions D'origine page 12

Keep these safety instructions in a safe
place.
2. Layout and items supplied
2.1 Layout (Fig. 1-6)
1. Compressed-air hose
2. Compressed-air gun
3. Tire pressure gauge
4. Paint spray gun with gravity-feed can
5. Nozzle
6. Suction-feed can for connection to the com
pressed-air gun
7. Blow-out pistol (compressed-air gun +
nozzle)
8. Paint spray gun with suction-feed can (com
pressed-air gun + suction-feed can)
2.2 Items supplied
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Original operating instructions
3. Proper use
The compressed-air hose is designed for
supplying air to air tools.
The blow-out pistol is designed for cleaning and
blowing out.
The tire pressure gauge is designed for infl ating
tires.
The paint spray gun is designed for spraying
paints and lacquers.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
Anl_DL_Werkzeugset_Profi_SPK9.indb 12 Anl_DL_Werkzeugset_Profi_SPK9.indb 12
GB
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Instructions for the 5-piece
accessory set
For information on the correct use of the
accessories, please refer to the following
overview.
•
Compressed air hose
For connecting to a compressed air source.
•
Blow-out pistol (Figure 1)
Working pressure in bar: 3-8
Use the compressed-air gun (2) in combination
with the nozzle (5) as a blow-out pistol (see Fig.
1, 6).
Range of applications:
For cleaning and blowing out hollow spaces or
hard-to-reach areas, as well as for cleaning
soiled equipment.
The infi nitely variable trigger lever allows an
exact dosing of compressed air.
•
Tire pressure gauge (Figure 2)
Working pressure in bar: 0-8
Range of applications:
The tire pressure gauge allows you to infl ate
tires easily and exactly. Use the pressure gauge
to check the tire pressure. If the tire pressure is
too high, you can reduce the pressure with the
integrated relief valve (b).
After fi lling with air, please check the set tire
pressure with a calibrated gauge, for example at a
petrol station.
•
Paint spray gun with cup (Figure 3)
Working pressure in bar: 3-4
Range of applications:
The pain spray gun is ideal for all small scale
priming and painting work.
- 12 -
05.08.2020 10:16:47 05.08.2020 10:16:47