Ec Declaration Of Conformity - Husqvarna 439 Manuel D'utilisation

EC Declaration of conformity

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declares under sole responsibility that
the chainsaws for forest service Husqvarna 439 from
2016's serial numbers and onwards (the year is clearly
stated in plain text on the type plate with subsequent
serial number), are in conformity with the requirements
of the COUNCIL'S DIRECTIVES:
• of May 17, 2006 "relating to machinery" 2006/42/EC.
• of February 26, 2014 "relating to electromagnetic
compatibility" 2014/30/EU.
• of May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC.
• of June 8, 2011 "on the restriction of the use of
certain hazardous substances in electrical and
electronic equipment" 2011/65/EU.
The following standards have been applied: EN ISO
12100:2010, EN ISO 14982:2009, EN ISO
11681-1:2011, EN 50581:2012.
Notified body: 0404, RISE SMP Svensk Maskinprovning
AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried
out EC type examination in accordance with the
machinery directive's (2006/42/EC) article 12, point 3b.
The certificates for EC type examination in accordance
with annex IX, has the numbers: 0404/13/2379 – 439.
In addition, 0404, RISE SMP Svensk Maskinprovning
AB, Box 7035, SE-750 07 Uppsala, Sweden, has
certified conformity with annex V of the Council's
Directive of May 8, 2000 "relating to the noise emissions
in the environment" 2000/14/EC. The certificates have
the numbers: 01/161/080 - 439.
For information relating to noise emissions, refer to
Technical data on page 34 .
The supplied chainsaw conforms to the example that
underwent EC type examination.
Huskvarna, 2016-03-30
Per Gustafsson, Development manager (authorized
representative for and responsible for technical
documentation.)
36
EC Declaration of Conformity
823 - 006 - 18.09.2019