Ec Declaration Of Conformity - Husqvarna 120i Manuel D'utilisation

EC Declaration of conformity

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declares under sole responsibility that
the cordless battery chainsaw Husqvarna 120i
(Platform CS100EU) from 2016's serial numbers and
onwards (the year is clearly stated in plain text on the
type plate with subsequent serial number), are in
conformity with the requirements of the COUNCIL'S
DIRECTIVES:
• of May 17, 2006 "relating to machinery" 2006/42/EC.
• of February 26, 2014 "relating to electromagnetic
compatibility" 2014/30/EU.
• of June 8, 2011 on the "restriction of use of certain
hazardous substances" 2011/65/EU
• of May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC.
The following standards have been applied: EN
60745-1:2009+A11:2010, EN
60745-2-13:2009+A1:2010, EN
55014-1:2006+A1:2009+A2:2011, EN 61000-4-2:2009,
EN 61000-4-3:2006+A1:2008, EN 55014-2:2015, EN
61000-6-2:2005.
Notified body: TÜV Rheinland LGA Products GmbH,
Tillystrasse 2, D-90431 Nuernberg, Germany, 0197, has
carried out EC type examination in accordance with the
machinery directive's (2006/42/EC) article 12, clause 3b.
The certificate has the number: BM 50356394 0001
The supplied chainsaw conforms to the example that
underwent EC type examination.
For information relating to noise emissions, see
Technical data on page 31 .
Huskvarna, 20181031
Pär Martinsson, Development manager (authorized
representative for Husqvarna AB and responsible for
technical documentation.)
34
EC Declaration of Conformity
805 - 002 -