Guide Bar And Saw Chain Combinations; Saw Chain Filing And File Gauges; Ec Declaration Of Conformity - Husqvarna 136Li Manuel D'utilisation

Masquer les pouces Voir aussi pour 136Li:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 174

Guide bar and saw chain combinations

The following cutting attachments are approved for the model Husqvarna 136Li.
Length, inch
Pitch, inch
12
3/8
Saw chain filing and file gauges

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:+46-36-146500, declares under sole responsibility that the cordless
battery chainsaws Husqvarna 136Li from 2016's serial numbers and onwards (the year is clearly stated in plain text on
the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL'S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
- of December 12, 2006 "relating to electrical equipment designed for use within certain voltage limits" 2006/95/EC.
- of September 6, 2006 "on batteries and accumulators and waste batteries and accumulators" 2006/66/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
The following standards have been applied: EN 60745-1, EN 60745-2-13, EN 60335-2-29, EN 55014-1, EN 55014-2.
Notified body: NB905, Intertek Deutschland Gmbh, Stagenstraße 1, 70771 Leinfelden-Echterdingen, Germany, has
carried out EC type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The
certificates for EC type examination in accordance with annex IX, have the numbers: NB905 15SHW0344-01.
For information relating to noise emissions, see the Technical data chapter.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna March 30, 2016
Lars Roos, Development manager
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
1156931-38 Rev.2 2016-11-29
TECHNICAL DATA
Guide bar
Gauge, mm
Max. nose radius
1,1
9T
Saw chain
Length, drive links
Type
(no.)
Husqvarna H38
45
English – 33

Publicité

Table des Matières
loading

Table des Matières