Accessories; Guide Bar And Saw Chain Combinations - Husqvarna 120 Mark II Manuel D'utilisation

Oil pump capacity at 9000 min
Oil tank volume
Type of oil pump
Saw chain and guide bar
Standard guide bar length
Recommended bar lengths
Usable cutting length
Maximum saw chain speed
Saw chain pitch
Thickness of drive links (gauge)
Type of drive sprocket
Number of drive sprocket teeth
Guide bar and saw chain
combinations
The cutting attachments below are
approved for the product.
Guide bar
Length, cm Pitch, mm
(in) (in)
33 (13) 8,25 (0,325)
38 (15) 8,25 (0,325)
35 (14) 9,52 (3/8)
40 (16) 9,52 (3/8)
45 (18) 9,52 (3/8)
28
-1

Accessories

Gauge, mm Max. nose
(in) radius
1,3 (0,050) 10T
7T
120 Mark II
unit
(P02138HV)
ml/min 7
3
cm 200
Automatic
cm (in) 35-40 (14-16)
cm (in) 35-45 (14-18)
34-39 (13.5
cm (in)
-15.5)
m/s 22.3
8,3 (0.325)
mm (in)
9,52 (3/8)
mm (in) 1.3 (0.05)
Spur
6 (drive sprocket
3/8)
7 (drive sprocket
0,325)
Saw chain
Type
Husqvarna
H30
Husqvarna
H37
654 - 006 - 10.02.2020
Drive link
count
56
64
52
56
62