Technical Data; Accessories; Recommended Cutting Equipment - Husqvarna 585 Manuel D'utilisation

4. Clean the product. Refer to
on page 23 for instructions.

Technical data

Engine
Cylinder displacement, cm
Idle speed, rpm
Maximum engine power acc. to ISO
7293, kW/hp @ rpm
Ignition system
Spark plug
Electrode gap, in/mm
Fuel and lubrication system
Fuel tank capacity, US pint/l
Oil tank capacity, US pint/l
Type of oil pump
Weight
Weight, lb/kg
Saw chain/guide bar
Type of drive sprocket/number of
teeth
Saw chain speed at 133% of max.
engine power speed, ft/s / m/s.

Recommended cutting equipment

A specific chainsaw model has to be evaluated with the
cutting equipment to be recommended and fulfill the
requirements in ANSI B175.1-2012 (Internal Combustion
Engine-Powered Hand-Held Chainsaws - Safety and
Environmental Requirements) and Canadian Standards
CSA Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback).
Chainsaw models Husqvarna 585, 592 XP, 592 XPG
met the safety requirements in ANSI B175.1-2012 and
Canadian Standards Association CSA Z62.1-15
(Chainsaws) and CSA Z62.3-11 (R2016) (Chainsaw
36
Maintenance schedule
Technical data
Husqvarna585
3
86.0
2800
5.1/6.9 @ 9600
NGK CMR6H
0.020/0.5
1.81/0.86
0.89/0.42
Adjustable
16.5/7.5
Rim/7
100.4/30.6

Accessories

5. Do a complete servicing of the product.
Husqvarna592 XP
92.7
2800
5.6/7.6 @ 9600
NGK CMR6H
0.020/0.5
1.81/0.86
0.89/0.42
Adjustable
16.3/7.4
Rim/7
100.4/30.6
kickback), when equipped with the below listed saw
chain and guide bar combination(s).
Note:
Other chainsaw models may not meet the
kickback requirements when equipped with the listed
guide bar and saw chain combinations.
We recommend only to use the listed guide bar and saw
chain combinations.
Kickback and guide bar nose radius
For sprocket nose bars the nose radius is defined by the
number of teeth (for example 10T). For solid guide bars
the nose radius is defined by the size of the nose radius.
Husqvarna592 XPG
92.7
2800
5.6/7.6 @ 9600
NGK CMR6H
0.020/0.5
1.81/0.86
0.89/0.42
Adjustable
16.7/7.6
Rim/7
100.4/30.6
1471 - 001 - 18.02.2021