Accessories - Husqvarna 420 EL Manuel D'utilisation

Guide bar and saw chain combinations
The cutting attachments below are approved for the
model 420 EL
Guide bar
Length, cm (in) Pitch, mm (in)
40 (16) 9,52 (3/8)
Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct
filing angles. We recommend you to always use a
Husqvarna file gauge to restore the sharpness of the
5/32 in / 4.0
37
1782 - 001 - 03.02.2022
Gauge, mm (in)
1,3 (0,050)
80°
mm

Accessories

Max. nose radius
7T
saw chain. The part numbers are given in the table
below.
If you do not know which saw chain you have on your
product, turn to your servicing dealer.
30°
Saw chain
Type
Husqvarna H37
0.025 in/0.65
0°
mm
Drive link count
56
5796536-01
101